Resin Vat Cleaning Tool .stl：Click here

 Resin recovery aid .stl：Click here

1. Remove the build plate.

2. Place the tool against both sides of the resin tank.

3. Click on“Tools→Clean Resin Vat→Cure”.

4. Lift the tool to remove the cured sheet in the bottom of the resin vat.

5. Use a paper towel to clean the tool after use.

6. Install the resin recovery aid and disposable filter.

7. Open the cover, release and remove the resin tank.

8. Empty the remaining resin in the tank.

9. Remove the residual resin using alcohol/IPA and cleanroom wiper.

10. Install the cleaned resin tank.

11. Close the cover.

12. Keep the resin bottle tightly closed, and store it in a cool place without direct sunlight.